Great Service

News

Home / News / Industry News / Brake Air Master Cylinder

Brake Air Master Cylinder

If you're in the market for a new brake air master cylinder, you've come to the right place. Advance Auto Parts offers online ordering and shipping of parts, or you can visit your local NAPA AUTO PARTS store. Both stores offer brake system products and can help you with routine maintenance and repairs. If you're still unsure of which type of brake air master cylinder you need for your vehicle, NAPA's experts are available to help.
A hydraulic brake system is very similar to one in a car, but it's more complex. The driver presses the brake pedal to move a pushrod against the booster, which amplifies the force to the master cylinder. Once the master cylinder releases the brakes, the brake pedal pushes against the booster's piston, which transfers the force to the calipers. A BRAKE AIR MASTER has several complicated mechanical parts, and it's important to know exactly what they do before you install one.
If you notice that the brake pedal is stiff or feels spongy, your vehicle may be suffering from power brake problems. This is because the brake booster's check valve may be leaking air and is no longer able to amplify the pressure. When the air level in the booster is too high, it reduces the amplifying power and requires you to press the brake pedal harder. Without a brake booster, this could lead to the breaking of brake parts.
Marsh Brothers Aviation King Air brake master cylinder upgrade kit includes hardware for the repair of a brake master cylinder, along with tooling to help you reassemble it. The proprietary piston rod lip seal reduces the risk of failure modes associated with traditional O-rings in dynamic applications. This kit also includes instructions for continuing airworthiness and an authorized release certificate. You should only replace your brake master cylinder if you've experienced any type of brake-related issues in the past.
Before replacing your brake master cylinder, check the bleeder valve. This valve is located in the master cylinder and works by letting brake fluid flow through it. Make sure the bleeder valve is closed prior to the pedal's descent to the floor. It should be clear with no bubbles. If it does, the pressure in the master cylinder is low. You should replace the brake master cylinder if the pressure level drops to a dangerously low level.